Cleaning Requirements
© 2024 — The Swimsuit Dryer Company Ltd
);
Cleaning Requirements
Keep the equipment clean; inside and out. With a removable Top Ring this makes the job effortless.
Test your RCD or GFCI underneath the Swimsuit Dryer to ensure it is operating safely.
Test your Dryer – Make sure the equipment starts and stops instantly. If your equipment does not start or stop instantly, or the equipment is over 5 years contact us for a service.
Simply press the “Test” button on the RCD / GFCI. The switch should flip to “OFF” position, then flip it back to “ON”. If this does not happen, please get in touch.
Spray the outside with the supplied Swimsuit Dryer Cleaner & wipe off with a cleaning cloth.
Lift the lid and spray inside the basket, then use a bottle brush to clean inside the basket.
Place a wet cloth inside the basket and operate as normal to remove excess cleaning solution.
Do not for any reason pour liquid into the unit.
Remove the lid screws with supplied special screwdriver.
Spray inside the unit with Swimsuit Dryer Cleaner then use a bottle brush to clean around the inside and outside of the basket and inner liner.
Check for any small items in the inner liner and remove. Re-fit the lid and screws.
Place a wet cloth inside the basket and operate as normal to remove excess cleaning solution.
Do not for any reason pour liquid into the unit.
© 2024 — The Swimsuit Dryer Company Ltd